01 Volkswagen Expands EV Battery Recall to 85,000 Vehicles, Adding Audi Models
Owners are asked to limit charging to 80 % after a fault in the battery‑management software.
Volkswagen announced on 28 October that its ongoing electric‑vehicle battery recall now covers 85,000 units worldwide, up from the 71,000 cars recalled a month earlier. The expansion brings 13,000 Audi Q4 E‑Tron and Q4 Sportback models into the program, making the recall the largest battery‑related safety action in the group’s history.
The root cause is a software defect in the Battery Management System (BMS) that can cause the high‑voltage pack to overheat under fast‑charging conditions. While no fires have been reported, the defect can accelerate cell degradation, potentially shortening the pack’s useful life. As a precaution, Volkswagen is instructing owners to limit charging to 80 % of the pack’s capacity until a software update is applied. The update, which can be installed via the OTA system, recalibrates the BMS to keep cell temperatures within safe limits during high‑current charging.
The recall affects all model‑year 2022‑2024 Q4 E‑Tron variants built at the Zwickau plant in Germany and the U.S. plant in Chattanooga. Volkswagen will cover the cost of the OTA update and, where necessary, a hardware inspection of the BMS module. Dealers are expected to start the service rollout in early November, with a target to complete all fixes by the end of Q1 2027.
Industry analysts see the recall as a wake‑up call for the broader EV market, where rapid‑charging adoption is outpacing the validation of BMS software across multiple OEMs. The incident underscores the importance of robust OTA capabilities and may accelerate the shift toward cell‑to‑pack architectures that reduce the number of control points. It also adds pressure on battery suppliers—primarily LG Energy Solution, CATL, and Samsung SDI—to tighten quality‑control protocols for high‑energy‑density cells used in European‑spec EVs.
The recall’s financial impact on Volkswagen is modest relative to its €250 billion 2026 revenue, but the reputational risk is significant. The company has pledged to enhance its BMS testing regime and to share lessons learned with industry groups such as the European Battery Alliance. The episode may also influence upcoming EU regulations on mandatory BMS safety standards, which are slated for adoption in 2028.
02 Xpeng Deploys Small‑Batch Solid‑State Cells for Its Iron Humanoid Robot
The first commercial use of solid‑state batteries in a service robot signals a shift toward higher‑energy‑density cells.
Chinese EV and robotics maker Xpeng Motors announced on 28 October that its Iron humanoid robot has entered small‑batch production powered by solid‑state lithium‑metal batteries. The move marks the first commercial deployment of solid‑state cells outside the automotive sector and highlights the technology’s suitability for high‑energy‑density, low‑temperature‑drift applications.
The solid‑state pack, developed in partnership with SolidPower China, delivers 450 Wh kg⁻¹ (approximately 30 % higher than Xpeng’s best LFP packs) and operates safely at temperatures ranging from ‑20 °C to 60 °C. Each robot is equipped with a 12 kWh solid‑state module that powers a 10‑hour continuous operation window while supporting a peak power output of 3 kW for dynamic movements. The cells use a sulfide‑based solid electrolyte, eliminating the flammable liquid electrolyte that has traditionally limited battery safety in robotics.
Production is limited to 5,000 units for the first year, primarily targeting industrial logistics and warehouse automation customers in China’s Tier‑1 cities. Xpeng expects to scale to 50,000 units by 2028 as the supply chain for solid‑state electrolytes matures. The company has secured a ¥1.2 billion (≈ US$170 million) investment from the China Battery Innovation Fund to expand its solid‑state cell line.
Analysts view the rollout as a proof‑of‑concept that could accelerate solid‑state adoption in EVs, where the technology promises 500 Wh kg⁻¹ and 800 Wh L⁻¹ targets by the early 2030s. Xpeng’s decision to start with robotics sidesteps the high‑volume cost pressures of automotive production while allowing the firm to collect real‑world performance data on cycle life, thermal management, and safety.
The announcement also underscores a strategic shift for Chinese battery manufacturers, who are increasingly diversifying beyond traditional LFP and NCM chemistries. If Xpeng’s robots meet reliability targets, the solid‑state supply chain could see a 10‑fold increase in demand within the next five years, prompting cell‑to‑pack redesigns across the industry.
03 EU Pushes Battery Recycling Capacity with the Circular Economy Act
A joint industry‑government letter calls for concrete measures to scale material recovery by 2035.
On 29 October, a coalition of European industry groups—including T&E, Recharge, Clean Tech for Europe, and the European Institute for Energy Solutions (EIES)—issued a joint letter urging the European Commission to adopt concrete measures under the forthcoming Circular Economy Act to scale battery‑recycling capacity. The letter calls for minimum recycling targets of 70 % material recovery by 2035 and for public‑private financing mechanisms to bring new recycling facilities online.
Europe currently recycles ≈ 30 % of end‑of‑life lithium‑ion batteries, far below the 80 % target set by the EU’s Battery Directive revision. The coalition highlights that four new recycling plants are under construction in Germany, France, and the Netherlands, but capacity will still fall short of the projected 1.5 TWh of retired batteries expected by 2030. To bridge the gap, the letter proposes:
- Fast‑track permitting for recycling projects that meet stringent environmental standards.
- EU‑wide “Battery Recycling Credits” similar to carbon credits, allowing manufacturers to offset material‑sourcing costs.
- Mandatory design‑for‑recycling guidelines, encouraging cell‑to‑pack architectures that simplify disassembly.
Key industry players such as Umicore, Northvolt, and Li-Cycle have pledged to invest €12 billion in new capacity, but they argue that regulatory certainty is essential to secure financing. The coalition also warns that without a level playing field, non‑EU manufacturers could dominate the recycling market, undermining the EU’s strategic autonomy over critical minerals like cobalt, nickel, and lithium.
The Circular Economy Act, slated for adoption in early 2027, could become the legal backbone for these initiatives. If implemented, it would align with the EU’s Fit‑for‑55 climate package by ensuring that up to 80 % of battery raw materials are sourced from recycled streams, reducing reliance on imports from the Democratic Republic of Congo and Indonesia.
Stakeholders view the letter as a critical step toward closing the loop on battery materials, a prerequisite for meeting the EU’s 30 million EV target by 2030. The push for recycling also dovetails with the European Battery Alliance’s roadmap, which envisions a fully circular battery value chain by 2040.
Quick News
-
BYD launches new Seagull EV with 5‑minute flash charging, price under $10,000 – The ultra‑affordable city car now supports a 5‑minute 200 kW flash charge that adds 120 km of range, positioning it as the cheapest fast‑charging EV on the market. Electrek
-
BYD opens pre‑orders for Denza N8 luxury SUV promising >1,000 km CLTC range – The flagship five‑seat SUV features a dual‑cell pack delivering 1,050 km (CLTC) on a single charge, with a 150 kWh capacity and an 800 V architecture that supports 350 kW charging. Electrek